Tips
- Thread starter SVT513
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
He wants to know about just the tip
You can sand and buff your stock ones... Just did mine today... Im not done yet still have more to buff but they close
BEFORE
AFTER...
BEFORE
AFTER...
Wilson
FRF Addict
stanless works
Mike Hammer
Full Access Member
You can sand and buff your stock ones... Just did mine today... Im not done yet still have more to buff but they close
BEFORE
AFTER...
What method did you use? Starting grit sand paper? What did you polish with? Buffing wheel? etc etc etc
Started with light grit only to get the heavy stuff off cause the metal is cheap grade stainless... I used wool pads(Foam pads tear apart) on a Milwaukee polisher not a orbital one just the old style straight spinning at 2400 rpm...
The paper I have is a wet sanding paper on a 2in roll that I can tear off a 2ft piece and wrap it and pull back and forth to get smooth
started with 400 then to Ford Bright Metal Cleaner with the polisher...
If you step it more with different grits you can get it looking like a mirror.. Rule is the more you buff the shinier it will get...
Wilson
FRF Addict
I would like to try some blue away but I'm to lazy
That stuff is for removing heat discoloring not polishing.. It would work if the tips are already polished... ae you talking about Simichrome Polish? if so ya that stuff works great but it really need to be polished first before you use that stuff...
Last edited:
Wilson
FRF Addict
Blue-Away and Simi chrome polish.
---------- Post added at 07:29 PM ---------- Previous post was at 07:28 PM ----------
ya I gess I'm talking about tips that have already been polished
---------- Post added at 07:29 PM ---------- Previous post was at 07:28 PM ----------
ya I gess I'm talking about tips that have already been polished
Similar threads
