Search results

Everything bolted right up.

I have the same intake but on a Gen 2

It was a few weeks ago but I installed a Z36 Powerstop brake kit went with the drilled/slotted rotors. Next are some SS lines and Motul RBF600 fluid which are on order. Truck didn't need brakes but I can't leave anything alone lol.

So today while driving to an appointment I smashed the skinny pedal to pass a car and the truck didn't downshift, fell on its face and did not want to accelerate. I was able to get around the car and when I did I got the wrench light and a CEL light. Truck did not want to make boost and felt as...

Mods please delete

So they are still testing them?

I am looking on their site now, which AOS did you buy it looks like they don't sell one specifically for the Raptor?

Got bored after wife had me put up Xmas lights and it was to nice outside to be in the house. So I started looking around the garage for something to do and I spotted a piece of aluminum from a CAI I bought for my Audi and I thought that will make a good piece to cover my horns and the wiring...

Seen a few videos for the front diff cover I will probably get the Spicer cover and drop the front diff to get it on. I seen a video for a ARB cover and he had to do some grinding of the cover but both guys dropped the diff down. I use Griot's products, I like their quick detailer spray, I use...

I need to do the same went out and did a trail run last weekend and now gotta do some detailing. I only have maybe two scratches on the drivers side but have a few more on the passenger side. And I now have a hatred for clay lol. Also installed some mud flaps and a Spicer rear diff cover...

Should have bought this, eliminates the need to cut or splice OEM wiring. https://specialtyperformanceparts.com/products/custom-universal-harness-tail-light-connector-adapter-powers-reverse-lights-backlights-spv-harness-system-works-with-many-vehicles-see-details

Got some Steele it and painted the rear wheel wells after buying Husky Liners that did not remotely fit so they got sent back. I also Installed some Rokblokz mud flaps.

Didn't do it today but hoping to have my new wheels installed tomorrow. I looked around and decided on the Motegi Racing MR150 Trailite wheels in a 17x8.5 matte bronze with a 0mm offset. I know there are much better wheels but seeing that the truck will see more pavement than off road I think...

I did install it and for me with not so great hearing it is of course a bit louder than the OEM resonator. Removal of the oem resonator required a ratchet strap to pull rear section back far enough to install the SPD piece and of course I had to use the same strap to pull the oem rear section...

Ordered an Accessport form Goosetuned with a stage 2 and TCM tunes while I was out of town for work. Got home yesterday and installed the tunes and today I went out a did some data logging and sent off the files and now waiting to hear back. I assume I'll hear back Monday all good so far.

Bed will be empty, when I install the Eibachs if the trucks level then I'll run it that way. I really wanted to know when someone says +2, +3, +4 what springs are they talking about. So the ones I linked above would be considered +2 seeing that they are stock height and eliminate factory block...

I have searched and I haven't found what people mean when they refer to +3 or +4 Deaver rear leaf springs. I will be installing a pair of Eibach springs up front and when the time comes I want to replace the rears with a set of Deavers and want to keep the truck level or as close to level as...

I need to see if the clicking noise is gone now that the ground is now connected to a body ground. I installed the tender before I seen this post and before I watched the video in one of the comments.

I know this is an older post but have a question about your battery tender. I connected my NOCO genius directly to the battery at first and when I plugged it in and turned it on I was getting a clicking noise coming from the fuse box does your truck make any noises when the tender is on? I have...

Only did a cold start and its a little louder, I didn't take it for a drive due to I was soaking wet from sweat. I'll report back tomorrow after I drive it to and from work.

Installed Jimmi Jammers in all four doors the other day and got up this morning and installed my SPD trombone resonator delete.

I got under there yesterday and sprayed them all down and today I broke them loose but due to weather I tightened them back up and will swap it out this weekend. Truck is a southern truck and it only has 15k miles so thankfully they had no rust or corrosion on the hardware at least not enough to...

I asked also because I know on my wifes car when I installed a resonator delete it was a pain to install. Of course you only have play in the exhaust on the rear section. And the rear section of the truck is a large section so looking for ideas to get the most movement out of it without dropping...

I searched and either I missed it or not using the correct wording but looking for some tips before I crawl under the truck. I got an SPD trombone resonator delete, looking to make the install as easy as possible I mean it looks pretty straight forward. I looked under the truck and it looks like...

Installed my ebay inter cooler started it yesterday right before it got dark due to raining most of the day yesterday. Just finished it up late in the day again due to rain. Took about 1.5-2hrs total I was in no rush did it by myself using a floor jack to hold it up pretty straight forward mod...