Search results

@GooseTuned stage 2 e85. Max torque around 3900rpm

Wifes 2022 Bronco on 37s. Baja Kits prerunner kit, trailing arms and Fox coilovers are on order.

Finally got around to installing my bypass shocks. Unfortunately, they sent me one grey and on silver. By the time i opened the boxes i had already removed the stock shocks, cut off the mounts and welded in the new tabs/ bump plates. The shop I ordered the shocks from offered to have the silver...

Anyone get their tranny rebuilt to handle more power? How did you do it? What kinda power is it capable of handling? Im currently at 500hp to the wheels and would like to increase reliability. Longer term upgrades will likely be bigger turbos and an RMB stroker once my current engine gives up...

Installed the Deaver +4hd, RPG +2 billet shackles, RPG bump kit and RPG RST18. Just need to weld up the shock tabs/ bump plates on the axle then i can install the Fox 3.5x16 5 tube bypasses! Love the stance now.

I think it turned out pretty good, the wifey loves it! Ordered a Baja Kits +3 setup and billet trailing arms today as well. Now we just need @COBB Tuning to work on this platform so @GooseTuned can work his magic!

I appreciate all the replies so far! I absolutely love this truck, Its everything I ever imagined it to be! Not much has happened since my original post as I've been extremely busy with work. Being a restaurant owner has been great for many years but honestly right now it sucks. Running at 25%...

I have a whipple, dont feel an noticeable power increase. You can definitely hear a difference though, sounds deeper on the low end and a significant increase in turbo whine

also want to upgrade the transmission but don't think that's something i'm capable of handling. Ill decide if im going to get it done after I decide on tires and regearing.

I am no means a mechanic but I do know how to wrench. Everything that has been done to the truck from stock was done by me and everything that i plan on doing will also be done by me. I hope to be able to help others learn from my experiences. Current mods: Method NV rims SVC FMIC SVC Baja frame...

Im not a Ford fan boy, I've just always liked the way F150s look compared to the other brands. With that said, this is actually my 6th F150 and will be the first one I actually modify. Sure, I had a 2004 Scab with long travel but I bought it that way and honestly it was a POS. I grew up in...

I just installed my XDI HPFP i got for my 2020 from @GooseTuned . I searched the internet for instruction but quickly realized they weren't relevant for my truck. I hope this helps anyone with a 2020 trying to install this pump to run Corn Juice. 1. Fuel Pump Control Module pigtail connector is...

Recieved the base map but not the HPFP. Im currently running a Goose stage 2 e50 tune and my tank is almost full. Cant do anything until i run the tank out, install the HPFP and fill up with e85

Bought a HPFP and revised calibrations from @GooseTuned

Is there a general consensus on what fiberglass fenders have the best fitment? I've seen some that look terrible in my opinion. I want as close to factory lines as possible. What are you running, hows the fitment and what did it cost for install and paint? I'm figuring it will be close to 4k? Thanks

Do Deaver/ Icon springs and upgraded Fox live valve shocks add any suspension travel increase or just ride quality improvement?

Any information on how to service a solenoid? Ive replaced two so far. I have a few in the garage that no longer work and would love to service them if possible

Depends what mid travel you're going with. BMS, RPG, Evil +2 and Camburg use 3.0 replacement so you could put that shock on now. If your going SVC or Evil +3 that use normal coil overs then like mentioned above slap some Geiser or Eibach coils on your current shocks and call it good until its...

Looking for the post title Thanks

Using forscan i got dtc "C110C:13 left front damper solenoid: circuit open" i confirmed it was an open line with a multi meter. Replaced the solenoid and truck is good to go now. I dont see any visible damage but assume the shop that installed the coils pinched the cable or something as it didnt...

Nope, slapped the rpg live valve bypass in and have been driving that way until i figure it out. Just got forscan so plan on doing some troubleshooting over the next few days

Got eibach coils and dirt king lt shackles installed today on my 2020. Immediately following a system message saying "drive control malfunction service required" popped up. Could this be from the change in ride height or did the shop possibly forget to plug a live valve in or damage a wire? Its...