Recent content by F23 raptor

Yes the lights are working when tied into the driver side brake light harness as intended. My only issue is that when the aux 3 switch is turned on, nothing is happening. Im going to try and switch to the aux 2 later today and see if its a harness issue or not. We turned aux 3 switch on and...

Yes, the fogs are wired (plug/play) on fog, aux 1, aux 2...they turn on and have back light just fine. Aux 3 is not working when I turn it on and it's wired as directed

I put on the extension pieces to give some more room on the aux wires. I'll have to go through and check again but spent a lot of time doing this already and I can't pin it down

Guess my biggest concern is we turned the aux 3 switch on and checked the wire itself and it shows nothing. Double checked that we didn't hook up to the dead wire and it's the right one.

Did this, I used the SPV kit and everything is ran correctly. Now I'm wondering why my aux 3 doesn't show any power

Really not hard to understand, everything is plug and play and wired correctly. However, the aux 3 switch seems to have no power

Correct, white light comes on in reverse as it's supposed to. Flip on aux 3 switch and nothing happens

Hey guys, so I have a 23 raptor with the 801a. Put the triple fog light kit and rigid rear lights on and working fine. Fogs are ran on fog switch, aux 1, aux 2. Wired the rears to aux 3 and nothing... the lights are on with red back lighting when approaching, Truck running and lights kick on...

I just ordered the 3 fog light setup from SPV myself! Sidney was great with answering any questions and i ended up going with the Rigid scenes with the amber backlights across all six fogs in the front. I also went with the Rigid SPL for the rear with the red backlight. Installing hopefully...

Hello all, taking a family trip this coming october to Vail, CO. Im from Cincinnati and will be driving the trip out so was curious if there are any good spots to check out? Id like to have some fun with the truck as intended on the way out or while im out there. Let me know if anyones been or...

Any noticeable difference in the boost tubes from K&N? performance or sound? Seem like they are a smoother more efficient tube over stock? Minimal gains it seems with the SPD downpipes but compared to stock they look way better and less restrictive. They sound absolutely amazing as well. TIA!

I ordered them already, I figure the sound is a selling point enough. I'll have them in place already for when some additional things like turbos and tuning are available on the 23+

So are there any differences in the engine between the gen 2 and 3? different cams, valves, etc?

Are these a stock gen 3 numbers? Putting down Impressive numbers for sure. So SPD downpipes help on stock trucks, but lose a bit on tuned? I'm assuming they'll shine with some larger turbos/ more boost?

Very interested in a set of these, I saw in another thread that they reduce power though? I'm assuming until larger turbos and some more boost they are not worth it?